Zum Hauptinhalt springen
0
Total llamadas: 0
IDs únicos: 0
Tracked time: 0
1 - Materials, Mechanical & NDT Testing Laboratories
-
DAkkS (Deutsche Akkreditierungsstelle GmbH)
Accreditation - ISO/IEC 17025
with number D-PL-13119-01-00
Medical devices: Physical tests of medical devices and implants and visual inspections of implants
-
DAkkS (Deutsche Akkreditierungsstelle GmbH)
Accreditation - ISO/IEC 17025
with number D-PL-13119-02-00
Mechanical, Vibration, Environmental, Dynamic, Chemical, Piping Testing, Manual non‐destructive tests (ultrasonic, visual, magnetic particle and penetrant testing) as well as mechanical ultrasonic testing of metallic and fibre reinforced materials and plastic as well as composite materials, Electrical tests of devices, components and assemblies
-
DAkkS (Deutsche Akkreditierungsstelle GmbH)
Accreditation - ISO/IEC 17025
with number D-PL-13119-02-02
Manual non‐destructive tests (ultrasonic, visual, magnetic particle and penetrant testing) as well as mechanical ultrasonic testing of metallic and fibre reinforced materials and plastic as well as composite materials.
-
DAkkS (Deutsche Akkreditierungsstelle GmbH)
Accreditation - ISO/IEC 17025
with number D-PL-13119-02-03
Electrical tests of devices, components and assemblies
-
DAkkS (Deutsche Akkreditierungsstelle GmbH)
Accreditation - ISO/IEC 17020
with number IS-13119-01
Inspection of products, product groups and components in the product areas (containers, profiles as well as pipes, fittings and pipe systems made of plastics, fiber reinforced plastics, plastic metal composites, metal) within the certification programs of building materials and construction productsInspection of factory production control of products (containers, profiles, pipes, pipe fittings, fittings and pipe systems made of plastics, fiber reinforced plastics, plastic-metal sandwich structures, metal) their product groups and components according to defined regulations and determination of their conformity with the specified requirements and - on the basis of expert assessment - with general requirements
-
DAkkS (Deutsche Akkreditierungsstelle GmbH)
Accreditation - ISO/IEC 17065
with number ZE-13119-01
Pipes and pipes system for water and gas supply as well as wastewater disposalCertification of construction products (system 1 for the assessment and verification of constancy of performance within the framework of the EU Construction Products Regulation No 305/2011 laying down the harmonised conditions for the marketing of construction products (CPR)
-
NADCAP (National Aerospace and Defense Contractors Accreditation Program)
Accreditation - Nadcap
with number 10518229266
Materials Testing Laboratory
-
NADCAP (National Aerospace and Defense Contractors Accreditation Program)
Accreditation - Nadcap
with number 10518225340
Non Metallic Material Testing
-
DEKRA Certification GmbH
Certificate of Registration - AS/EN 9100
with number 880114001/5
Not accredited sub-area: Technical-scientific services and research services in the fields of manufacturing and processing of fibre reinforced plastics; fixture manufacturing and specimens production; calculation and strength assessment; development and sales of software and information management systems.
-
DEKRA Certification GmbH
Certificate of Registration - ISO 14001
with number 170813096/6
Technical-scientific services and research in the fields of materials testing (metals, plastics, composites); component-, structure and product testing and qualification; the development of technologies, fiber composite products and test methods; the calculation and development / distribution of material databases; especially for aviation, automotive and traffic engineering and mechanical engineering
-
AIRBUS
Client Approval
with number 169755
Material Testing (Composite, Metal)
-
AIRBUS
Client Approval
with number 169755
Structural Testing
-
AIRBUS HELICOPTERS
Client Approval
with number SPV2018-12
Static mechanical testing of fibre reinforced plastic material (coupon/element level)Fatigue mechanical testing of fibre reinforced plastic materials (coupon/element level)
-
Embraer
Client Approval
Metallic Materials - Mechanical, metallographic and Corrosion TestingNon-Metallic Materials / Composites - Mechanical Testing, Physical Testing and Thermal TestingNon-Destructive Testing
-
Rolls-Royce
Client Approval
with number 101270/05
Structural Rig Testing, Test Support Activities, Sub-tier Approval
-
Eagle Registrations
Certificate of Registration - AS/EN 9100
with number 5069
NDT inspections
-
NADCAP (National Aerospace and Defense Contractors Accreditation Program)
Accreditation - Nadcap
with number 11573212941
Non-Destructive Testing (NDT)
-
Eagle Registrations
Certificate of Registration - AS/EN 9100
with number 5069
NDT inspections
-
NADCAP (National Aerospace and Defense Contractors Accreditation Program)
Accreditation - Nadcap
with number 9291204428
Non-Destructive Testing (NDT)
-
Eagle Registrations
Certificate of Registration - AS/EN 9100
with number 5069
NDT inspections
-
Eagle Registrations
Certificate of Registration - AS/EN 9100
with number 5069
NDT Inspection
-
NADCAP (National Aerospace and Defense Contractors Accreditation Program)
Accreditation - Nadcap
with number 10958213651
Non-Destructive Testing (NDT)
2 - EMC, Wireless, Electrical & Environmental Testing Laboratories
-
DAkkS (Deutsche Akkreditierungsstelle GmbH)
Accreditation - ISO/IEC 17025
with number D-PL-13119-02-00
d9a32b84-1e6e-402e-b0bc-b8dd6be7a56b2
Mechanical, Vibration, Environmental, Dynamic, Chemical, Piping Testing, Manual non‐destructive tests (ultrasonic, visual, magnetic particle and penetrant testing) as well as mechanical ultrasonic testing of metallic and fibre reinforced materials and plastic as well as composite materials, Electrical tests of devices, components and assemblies
-
DAkkS (Deutsche Akkreditierungsstelle GmbH)
Accreditation - ISO/IEC 17025
with number D-PL-13119-02-03
1552ed82-a5c0-4d84-b086-c5e0d99485a02
Electrical tests of devices, components and assemblies
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17025
with number 25/LC10.165
Radiofrequency Equipment Calibration
-
A2LA
Accreditation - ISO/IEC 17025
with number 7256.01
Automotive, electrical, electronic, and mechanical components and assemblies, Military and Airborne Equipment, Industrial Control Equipment, power conversion and supply systems – EMC and electrical tests
-
A2LA
Accreditation - ISO/IEC 17025
with number 7256.02
035d99fe-1ac3-475b-8cff-d3476ebcd1092
Automotive, electrical, electronic, and mechanical components and assemblies – Environmental climatic, vibration, acoustic, ingress protection and mechanical tests
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17025
with number 9/LE894
EMC, Automotive, Electrical Safety, Radio, Vibration, Climatics Tests;
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17025
with number 9/LE2619
Acoustics Testing
-
FCC (USA)
Accreditation - ISO/IEC 17025
with number ES0002
EMC and RF testing for FCC compliance part 15 and 18
-
ISED (Canada)
Accreditation - ISO/IEC 17025
with number WDTL 5766A
EMC and RF testing for ISED (IC) compliance
-
KC (South Korea)
Accreditation - ISO/IEC 17025
with number EU0099
Testing for KC compliance
-
VCCI (Japan)
Accreditation - ISO/IEC 17025
with number R-12867
EMC testing for VCCI compliance
-
Energy Star
Accreditation - ISO/IEC 17025
Electrical / Energy Efficiency
-
Weightless
Accreditation - ISO/IEC 17025
Wireless Devices Test house for Weightless Certification
-
Sigfox
Accreditation - ISO/IEC 17025
Wireless Devices Test house for Sigfox Ready Certification
-
General Motors (GM)
Client Approval
EMC testing for automotive components
-
Jaguar Land Rover (JLR)
Client Approval
EMC testing for automotive components
-
Hyundai Motor Group
Client Approval
EMC testing for automotive components
-
Geely
Client Approval
Geely EMC test
-
Lotus
Client Approval
Lotus EMC test
-
CEVT
Client Approval
CEVT EMC test
3 - Fire Safety & Industrial & Construction Products Testing Laboratories
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17025
with number 9/LE895
Concrete, derivatives and constituents
Reaction to fire test and Fire resistance
Components of automatic fire detection systems: Detectors and smoke alarm devices
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17025
with number 9/LE891
Sanitary tapware
Heat or cold generators and emitters, materials and components
Concrete, derivatives and constituents
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17025
with number 9/LE901
Fired clay ceramics and non-structural sealants
Thermal insulating products. Insulating glass units testing
Constructive elements of building and their accessories
Security storage units and physical security products
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17025
with number 9/LE2492
Testing SYSTEM 3 of Annex V EU Construction products regulation nº 305/2011 EU
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17025
with number 9/LE766
Acoustics testing
-
Spanish Ministry of Public Works
Authorisation
Inclusion in the IMO list of approval fire laboratories
-
Generalitat de Catalunya
Authorisation
with number L0600386
Responsibility Statement of Testing Laboratories for Building Quality Control
-
Generalitat de Catalunya
Authorisation
Body registered in the register of industrial safety agents of Catalonia (RASIC) for non-traditional fire protection products
-
EGOLF
Client Approval
Membership EGOLF (European Group of Organisations for Fire Testing, Inspection and Certification).
-
ECB-S
Client Approval
Approval for Burglary Resistance Products
-
Vereinigung Kantonaler Feuerversicherungen (VKF)
Authorisation
Official approval as a testing laboratory within the Swiss certification and homologation process
-
KFSD (Kuwait Fire Service Directorate)
Authorisation
Testing laboratories approved by KFSD
-
UAE Civil Defence
Authorisation
Products Acceptable to Civil Defence; Testig and Certification
-
QCD (Qatar Civil Defence)
Authorisation
with number MC-01-S2012
CURRENTLY APPROVED CERTIFICATION BODIES & TESTING LABORATORIES
-
SII (Standards Institution of Israel)
Authorisation
Resistance and reaction to fire tests
-
ROP Civil Defense (Royal Oman Police)
Authorisation
Oman Civil Defence testing and certification approval through Applus Fire qualifications
-
LRQA (Lloyd's Register Quality Assurance Limited)
Client Approval
with number LR21469353SF
Jet Fire Testing
-
CCS Greece
Certificate of Registration - Others
IMO FTP Code Part, 1, 3, 4 and 5,8,9,11
-
Vereinigung Kantonaler Feuerversicherungen (VKF)
Certificate of Registration - Others
Laboratory for expert opinions (VKF-G) for the category “building components” (“parts
of construction”) according to European test and classification standards for fire resistance
testing.
Recognised Body as a test centre/assessment body (VKF) for the category 'Ventilation and flue system components in accordance with the European testing and classification standards'
-
EGOLF
Client Approval
Applus Laboratories (LGAI Technological Center SA) is an associate member of the association for specialist fire protection.
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17025
with number 710/LE1238
Fire protection tests
4 - IT Security & Payment Testing Laboratories
5 - Product Certification and Inspection
-
Generalitat de Catalunya
Authorisation
with number ON 0962
Notified Body for automatic weighing instruments and non-automatic weighing instruments.
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17065
with number 12/C-PR444
NOTIFIED BODY: MARKETING AND COMMISSIONING PHASE
Exhaust gas analyzers
Non-automatic weighing instruments
STATE METROLOGICAL CONTROL: COMMERCIALIZATION AND COMMISSIONING PHASE
Cinemometers
Breathalyzers
Opacimeters
Temperature recorders and thermometers
Sound level meters, acoustic calibrators and dosimeters
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17065
with number 12/C-PR054
NOTIFIED BODY (CE MARKING)
Directive 92/42/EEC (Efficiency requirements for new hot-water boilers fired with liquid or gaseous fuels)
Directive 2006/42/CE machinery
Regulation (EU) 2016/426 appliances burning gaseous fuels
Construction products regulation (UE) No 305/2011
Regulation (EU) of the european parliament and of the council on personal protective equipment
PRODUCT CONTROL BODY (NATIONAL REGULATIONS)
Production control of ready-mix concrete
Sanitary Tapware
PRODUCT
Cement
Concrete
Insulating glass units
Safes, doors, strongrooms and windows and doors burglar resistance and safety compartments
Conduit systems for cable management
Plastics piping systems
Fire detection and fire alarm systems
Alarm systems intrusion and hold-up systems
APPLUS FIRE
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17065
with number 12/C-PR346
Industrial Product, Certification Telecom Equipment, Radio Equipment, Unmanned Aircraft System
-
European Commission
Notified Body
with number NB 0370
Legislation : 2014/31/EU Non-automatic weighing instruments
-
Generalitat de Catalunya
Authorisation
with number 02-OC-0001
Metrological Control Body for measuring instruments, in the marketing and commissioning phase, subject to the metrological control of the State:
Instruments intended to measure the speed of movement of motor vehicles.
Instruments designed to measure the concentration of alcohol in the aspirated air.
Instruments intended to measure opacity and determine the light absorption coefficient used in the inspection and maintenance of motor vehicles equipped with compression ignition (diesel) engines.
Temperature recording instruments and thermometers.
Instruments intended for measuring audible sound and acoustic calibrators.
-
European Commission
Notified Body
with number NB 0370
Legislation: 2014/32/EU Measuring Instruments Directive
-
European Commission
Notified Body
with number NB 2876
Hazardous Locations ATEX 2014/34/EU Equipment and protective systems intended for use in potentially explosive atmospheres (recast)
-
European Commission
Notified Body
with number NB 0370
426f932e-2d94-4976-a9a4-437ddf1e29135
Regulation (EU) No 305/2011 - Construction products
-
European Commission
Notified Body
with number NB 0370
2014/53/EU Radio equipment Directive
-
European Commission
Notified Body
with number NB 0370
Electromagnetic Compatibility Directive (EMCD)
-
European Commission
Notified Body
with number NB 0370
Regulation (EU) No 305/2011 - Construction products
-
European Commission
Notified Body
with number NB 0370
Legislation : Regulation (EU) 2016/425 Personal protective equipment
-
European Commission
Notified Body
with number NB 0370
Legislation : Regulation (EU) 2016/426 Appliances burning gaseous fuels
-
European Commission
Notified Body
with number NB 0370
Legislation : 2006/42/EC Machinery
-
European Commission
Notified Body
with number NB 0370
4c1ee83d-92c1-43ca-9ba0-c4dd7d4c81245
Regulation (EU) No 305/2011 - Construction products
-
European Commission
Notified Body
with number NB 0370
Legislation: 92/42/EEC Hot-water boilers
-
European Commission
Notified Body
with number NB 0370
Low Voltage Directive (LVD)
-
European Commission
Notified Body
with number NB 0370
Electromagnetic Compatibility Directive (EMCD)
-
Spanish Ministry of Transports, Mobility and Urban agenda
Authorisation
Official approval of the Applus+ brand for the certification of:
Concrete.
Active reinforcement steel.
Passive reinforcements steel.
Welded fabric for reinforced concrete.
Passive reinforcements steel.
Post-tensioning systems installation.
-
Spanish Ministry of Public Works
Authorisation
Approval as a Certification Body in the field of the standards application UNE-EN 15085 (Welding of vehicles and railway components)
-
Generalitat de Catalunya
Authorisation
with number EA/CM 2020/026
Certification of ready-mix concrete plants
-
Generalitat de Catalunya
Authorisation
with number RASIC-OCP-0002
Body registered in the Register of Industrial Safety Agents of Catalonia (RASIC) for the control of the production of concrete manufactured at the plant.
-
Generalitat de Catalunya
Authorisation
with number RASIC-OCP-0002
Product Conformity Control Body (RASIC): protection against non-traditional or innovative fires for which there are no standards and there is risk
Concrete manufactured in the plant
Sanitary fittings
-
UAE Civil Defence
Authorisation
Products Acceptable to Civil Defence; Testig and Certification
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17065
with number 12/C-PR040
Certification of the food products
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17065
with number 225/C-PR443
NOTIFIED BODY: MARKETING STAGE AND COMMISSIONING:
Automatic Weighing Instruments
Non-Automatic Weighing Instruments
-
Generalitat de Catalunya
Authorisation
with number NB 0370
Notified Body for the marketing and commissioning phase of:
Instruments intended to measure exhaust gas emissions from vehicles equipped with spark ignition engines.
Non-automatic weighing instruments.
-
European Commission
Notified Body
with number NB 2900
Hazardous Locations 2014/34/EU Equipment and protective systems intented for use in potentially explosive atmospheres (recast)
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17065
with number 203/C-PR486
8d4e559b-ae63-4586-bee9-af7d8c8dafa95
Grid code and renewable energies
-
European Commission
Notified Body
with number NB 0962
-Non-automatic weighing
instruments
-
European Commission
Notified Body
with number NB 0962
Automatic weighing instruments (Annex VIII MI 006)
Automatic weight sensor
Automatic weighing instruments (Annex VIII MI 006)
Automatic gravimetric filling instrument
Automatic weighing instruments (Annex VIII MI 006)
Continuous totalizer
Automatic weighing instruments (Annex VIII MI 006)
Discontinuous totalizer (hopper totalizing weigher)
Automatic weighing instruments (Annex VIII MI 006)
Railway weighbridge
-
European Commission
Notified Body
with number NB 1862
-Non-automatic weighing instruments
-
European Commission
Notified Body
with number NB 1862
Dimensional Measuring Instruments (Annex XI MI 009)
Exhaust Gas Analysers (Annex XII MI-010)
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17065
with number 12/C-PR483
RECYCLED PLASTICS:
Traceability in the plastics recycling process.
Recycled content in plastic products
-
Generalitat de Catalunya
Authorisation
with number 02-OC-0001
Metrological Control Body, for the marketing and commissioning phase of measuring instruments subject to State metrological control:
Kinemometers. Module F.
Instruments intended to measure the concentration of alcohol in aspirated air. Module F.
Opacimeters. Module F.
Temperature recorders and thermometers for the transport, storage, distribution, and control of temperature-controlled products. Module F.
Sound level meters and acoustic calibrators. Module F.
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17065
with number 231/C-PR430
NOTIFIED BODY: MARKETING AND COMMISSIONING PHASE
Non-automatic operating instruments
Instruments for multidimensional measurements
Exhaust gas analyzers
METROLOGICAL STATE CONTROL: MARKETING AND COMMISSIONING PHASE
Opacimeters
6 - Engineering & Equipment Development
7 - Calibration & Legal Metrology
-
Generalitat de Catalunya
Authorisation
with number ON 0962
5d2a7d69-026e-4eb0-927f-d75a764b1b327
Notified Body for automatic weighing instruments and non-automatic weighing instruments.
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17065
with number 12/C-PR444
cc409549-d618-4927-9d88-d2585d5138087
NOTIFIED BODY: MARKETING AND COMMISSIONING PHASE
Exhaust gas analyzers
Non-automatic weighing instruments
STATE METROLOGICAL CONTROL: COMMERCIALIZATION AND COMMISSIONING PHASE
Cinemometers
Breathalyzers
Opacimeters
Temperature recorders and thermometers
Sound level meters, acoustic calibrators and dosimeters
-
European Commission
Notified Body
with number NB 0370
ec8fe5fb-80f2-4e5e-8bbd-a519308d7c197
Legislation : 2014/31/EU Non-automatic weighing instruments
-
Generalitat de Catalunya
Authorisation
with number 02-OC-0001
79498c8c-42e3-42d6-9b17-e40f38772e3d7
Metrological Control Body for measuring instruments, in the marketing and commissioning phase, subject to the metrological control of the State:
Instruments intended to measure the speed of movement of motor vehicles.
Instruments designed to measure the concentration of alcohol in the aspirated air.
Instruments intended to measure opacity and determine the light absorption coefficient used in the inspection and maintenance of motor vehicles equipped with compression ignition (diesel) engines.
Temperature recording instruments and thermometers.
Instruments intended for measuring audible sound and acoustic calibrators.
-
European Commission
Notified Body
with number NB 0370
cdd0e8ed-e9ba-4702-b95a-49bbd2ac554f7
Legislation: 2014/32/EU Measuring Instruments Directive
-
Generalitat de Catalunya
Authorisation
Metrological Control Body for instruments intended to measure opacity and determine the light absorption coefficient of the exhaust gases of vehicles equipped with compression ignition engines, in the conformity assessment module F.
-
Generalitat de Catalunya
Authorisation
Metrological Control Body for instruments intended to measure audible sound and acoustic calibrators, in the conformity assessment module F
-
Generalitat de Catalunya
Authorisation
Metrological Control Body for instruments intended to measure the concentration of alcohol in the aspirated air, in the conformity assessment module F
-
Generalitat de Catalunya
Authorisation
with number 02-OC-0001
Metrological Control Body for instruments intended to measure the road speed of motor vehicles, in the conformity assessment module F
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17065
with number 225/C-PR443
22be3410-e0dd-42f5-ad8b-0e8e9488d2787
NOTIFIED BODY: MARKETING STAGE AND COMMISSIONING:
Automatic Weighing Instruments
Non-Automatic Weighing Instruments
-
Generalitat de Catalunya
Authorisation
with number NB 0370
de9917bf-9614-453a-aa11-228dedc307007
Notified Body for the marketing and commissioning phase of:
Instruments intended to measure exhaust gas emissions from vehicles equipped with spark ignition engines.
Non-automatic weighing instruments.
-
European Commission
Notified Body
with number NB 0962
b686d21c-49a0-4343-9be8-54ce10885ae87
-Non-automatic weighing
instruments
-
European Commission
Notified Body
with number NB 0962
9c60d93d-152a-47b5-ba85-f5c29d547c817
Automatic weighing instruments (Annex VIII MI 006)
Automatic weight sensor
Automatic weighing instruments (Annex VIII MI 006)
Automatic gravimetric filling instrument
Automatic weighing instruments (Annex VIII MI 006)
Continuous totalizer
Automatic weighing instruments (Annex VIII MI 006)
Discontinuous totalizer (hopper totalizing weigher)
Automatic weighing instruments (Annex VIII MI 006)
Railway weighbridge
-
European Commission
Notified Body
with number NB 1862
c8928925-7c79-49ee-a28b-2462f39c43987
-Non-automatic weighing instruments
-
European Commission
Notified Body
with number NB 1862
9aad2562-68ab-43f1-a8eb-734979e8e4a37
Dimensional Measuring Instruments (Annex XI MI 009)
Exhaust Gas Analysers (Annex XII MI-010)
-
Generalitat de Catalunya
Authorisation
with number 02-ON-0001
Metrological Control Record for the activities of:
Automatic weighing instruments.
Non-automatic weighing instruments.
-
Generalitat de Catalunya
Authorisation
with number 02-OC-0001
9c5fb98a-b3a3-4fa4-b225-c3f9ce6fd6a87
Metrological Control Body, for the marketing and commissioning phase of measuring instruments subject to State metrological control:
Kinemometers. Module F.
Instruments intended to measure the concentration of alcohol in aspirated air. Module F.
Opacimeters. Module F.
Temperature recorders and thermometers for the transport, storage, distribution, and control of temperature-controlled products. Module F.
Sound level meters and acoustic calibrators. Module F.
-
Generalitat de Catalunya
Authorisation
with number 02-ON-0002
Metrological Control Record for the activities of:
Non-automatic weighing instruments.
Instruments intended to measure exhaust gas emissions from vehicles equipped with spark ignition engines (gasoline).
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17065
with number 231/C-PR430
880291c5-8a9d-4d98-bdbf-74d4c89c9c507
NOTIFIED BODY: MARKETING AND COMMISSIONING PHASE
Non-automatic operating instruments
Instruments for multidimensional measurements
Exhaust gas analyzers
METROLOGICAL STATE CONTROL: MARKETING AND COMMISSIONING PHASE
Opacimeters
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17025
with number 93/LC10.247
Flow
Dimensional
DC and Low Frequency Electricity
Pressure and Vacuum
Temperature and Humidity
Time and Frequency
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17025
with number 74/LC10.049
*Gas concentration*Mass*Optics*Gas meters
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17025
with number 93/LC10.263
Optics.
-
LL-C (CERTIFICATION)
Certificate of Registration - ISO 9001
with number 343548
Calibration, verification, and repair of measuring instruments and equipment.
Qualification of pharmaceutical equipment, facilities, and services.
Validation of processes, computerized systems, transportation, and analytical methods.
Operation of environmental and meteorological networks and systems
-
LL-C (CERTIFICATION)
Certificate of Registration - ISO 14001
with number 343548
Calibration, verification and repair of measuring instruments and equipment.
Qualification of pharmaceutical equipment, facilities and services.
Validation of processes, computerized systems, transport and analytical methods.
Operation of environmental and meteorological networks and systems
-
LL-C (CERTIFICATION)
Certificate of Registration - ISO 14001
with number 343548
Calibration, verification and repair of measuring instruments and equipment.
Qualification of pharmaceutical equipment, facilities and services.
Validation of processes, computerized systems, transport and analytical methods.
Operation of environmental and meteorological networks and systems
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17025
with number 25/LC10.151
Gas Concentration
Dimensional
DC and Low Frequency Electricity
Force and Torque
Mass
Optics
Pressure and Vacuum
-
ENAC (Entidad Nacional de Acreditación)
Accreditation - ISO/IEC 17025
with number 93/LC10.064
Mass
Volume
8 - Packaging Testing Laboratories
9 - Medical Devices Testing and Certification
-
PJLA (Perry Johnson Laboratory Accreditation)
Accreditation - ISO/IEC 17025
with number L26-114
Material Testing